Four performers wearing custom burgundy plush bear mascot costumes greeting children at a theme park
4.6 kg worn weight · size M 180° mesh vision 160–190 cm performer fit
Custom mascot costume · OEM/ODM since 2013

A Mascot Costume, Built To Be Worn

Sculpted foam head, 180° mesh vision, twin fans and a shoulder harness that carries the weight — patterned to one performer. Sample in 10–14 days, wear-tested for 45 minutes before bulk.

Sample in10–14 days

bulk 30–35 days after approval

One Suit. One Character. A Thousand Photos. Built to be worn, not displayed.

Performer lowering a custom plush mascot costume head over their head, backstage before an event
Dressed in 10 minutes · one performer
The costume

Built like equipment. Worn like a character.

A walk-about costume is a full-body character suit worn by one person for a whole event: a sculpted foam head they can see out of, a plush shell that still reads from twenty metres away, and a body light enough to keep on through a 45-minute meet-and-greet set. It is not a giant display piece and it is not a party rental — it is the thing your brand wears when it has to shake hands.

So we engineer it around three jobs. It has to read — proportions, head-to-body ratio and silhouette fixed on a turnaround before a single panel is cut. It has to be worn — weight carried on the shoulders, 180° mesh vision, twin fans, a real zipper the wearer can reach. It has to survive — reinforced seams, replaceable fur panels, and spares in the case when it travels.

  • Foam head with mesh eyes, chin strap and twin cooling fans
  • Plush body suit with padded shoulder harness and full-length back zipper
  • Oversized mitten gloves and shoes, made to the wearer's own fit
  • Wheeled flight case, spare fan set, repair kit and care manual
4.6 kgworn weight, size M
180°mesh vision field
160–190cm performer fit
12 moafter-sales support
Where it goes to work

Six places a costume earns its keep

Same suit, six very different floors. Each one puts a different demand on the build — heat, crowd pressure, walk distance, or camera time.

Take it apart

Know It Detailed.

Six parts decide whether a costume gets worn for six events or one. Tap each one.

Sculpted foam mascot costume head with plush skin half applied on a workbench
Before and after the suit

From your artwork to the first walk

Six steps, no mystery. Sampling starts only after you have seen the character in the round, and nothing goes to bulk until a real performer has worn the sample for 45 minutes.

STEP 01

Brief & character sheet

Send artwork, a brand guideline page, or even a rough sketch on a napkin. Tell us the wearer's height and where the suit will work. We come back with a one-page spec — proportions, materials, poses, price band — and a costed quote.

Reply within 48 hours
STEP 02

Turnaround at the wearer's height

Before anything is cut, we draw front, side and back views at the finished height. This is where a character is won or lost: head-to-body ratio, arm reach, how the feet sit. You approve the drawing, not a photo of a finished head.

2–3 days
STEP 03

Head sculpt

The head is blocked out in foam, carved to the drawing, then skinned in plush panel by panel with the fur direction worked out first. We photograph it from four angles under neutral light and send the shots for approval or a second pass.

5–7 days
STEP 04

Pattern & first sample

Body pattern, harness, gloves and shoes are built to one wearer's measurements. You receive the full sample — not just a head — so the weight and the silhouette can be judged together.

10–14 days
STEP 05

Wearing trial

A performer of your wearer's height does a 45-minute walk test: heat inside the head, field of vision, hearing, hand range, how quickly they can get out unaided. We report the numbers with the sample, and adjust before bulk.

With the sample
STEP 06

Bulk production & QC

Every head is checked for vision gaps and strap condition, every fan is run for 30 minutes, every seam on the body is pull-tested at the stress points. Then the suit is folded into its flight case with spares.

30–35 days after approval
After it ships. The case holds a spare fan set, a patch of matching fur, thread and a repair card, so a torn seam three cities into a tour is a ten-minute fix rather than a return. Care videos cover dressing, cooling breaks, surface cleaning and off-season storage, and the twelve-month after-sales line answers the questions that only come up on site — usually at 8 a.m. on event day.
Fit & sizes

A costume fits a person, not an average

We build to the wearer's measurements rather than pushing a size chart. The table below is the standard band we use before the first pattern.

Standard bands — each suit is then patterned to the individual wearer.
SizeWearer heightHead circumferenceFinished heightWorn weightTypical use
S155–168 cm54–58 cm175–190 cm4.2 kgRetail, school, indoor meet & greet
M165–178 cm56–60 cm185–200 cm4.6 kgTheme park, expo, general events
L175–190 cm58–62 cm195–215 cm5.0 kgStadium, parade, outdoor activation
Kids120–140 cm52–55 cm140–160 cm3.2 kgFamily shows, school programmes

If two performers share one suit, we add a second headband-and-liner set, a spare pair of shoes in the other size, and a quick-release shoulder setting so the harness can be changed over in under a minute. Glasses, hearing aids and longer hair are all fine — we set the mesh and chin strap around them at sampling.

Sewing floor at our Dongguan plush factory — the team behind the custom mascot costumes
The team behind the suit

12 years. One OEM factory. Built for things people wear.

The workshop that makes your giant display bear makes your costume too — same pattern room, same oversized sewing line, but a separate QC route, because a suit that has to be worn is judged on different things than a bear that has to be looked at.

  • In-house sculpting, pattern making and plush skinning
  • Wear-testing with performers before bulk, on every new character
  • 80,000 pcs monthly capacity — exports to 40+ countries
  • BSCI · Disney FAMA · ISO 9001 certified workshop
FAQ

The questions buyers actually ask

How long does a custom costume take?+
Sample in 10–14 days from approved drawings; bulk 30–35 days after sample approval. Add shipping. If you are working to a fixed event date, tell us the date in the first message — we schedule backwards from it rather than forwards from the deposit.
Can you reproduce an existing or licensed character?+
Yes, with written authorisation from the rights holder — a licence letter or an internal brand-ownership confirmation is enough. Without it we will not copy a third party's character, and we will say so before quoting. Original characters built from your own artwork have no such requirement.
How hot does it get inside, really?+
The head is the hot part, not the body: two fans pull air through vents at the ear line and push it across the face, and the wearer takes the head off between sets. Standard practice is 20–45 minute sets with 15-minute breaks, plus water. For outdoor summer work we quote a gel cooling vest that sits under the harness and buys roughly 40 extra minutes.
Can a performer wear glasses or a hearing aid inside?+
Yes. The headband and chin strap are set around them at sampling, and the mesh panel is sized so it does not fog or sit against the lens. Hearing is limited by the foam shell, so we position the ear vents and, if the performer needs it, leave a channel for an earpiece.
What does shipping look like?+
One suit travels in a wheeled flight case around 70 × 50 × 45 cm, roughly 12–14 kg packed, so it goes by air courier or as excess baggage — no crate and no freight forwarder needed. For multi-suit orders we palletise the cases and can quote DDP to your venue.
How is it cleaned and stored?+
Surface-clean the plush with a soft damp cloth and a mild soap solution; the head liner and the body liner unzip and wash separately by hand. Never machine-wash or tumble-dry the shell. Store the head stuffed with acid-free paper in its case, away from sunlight, and the suit will hold its shape between seasons.
What happens if something breaks mid-tour?+
The case ships with a spare fan set, matching fur, thread, needles and a repair card, which covers the failures that actually happen — a fan dying, a seam opening at the wrist, a shoe sole lifting. For anything beyond that, the twelve-month after-sales line arranges a replacement part or a repair at our cost within the first year.
Exhibitions & trade shows

Looking for a full set of solutions for exhibitions?

Booth plush, visitor giveaways and the mascot people queue for a photo with — planned backwards from your show date.

Tap here to view the Solution for Exhibitions
New Inquiry

Tell us who wears it.

Send your character and the wearer's height — we reply with a spec sheet and a quote within 24 hours.

Start your costume

Whether you have a finished character sheet or a logo and an idea, the first step is the same: a short brief and a real factory answer — no stock photos of somebody else's suit.

  • Sample in 10–14 days, bulk in 30–35 days
  • Built to one wearer's measurements, not an average
  • Flight case, spares and repair kit included
  • 12-month after-sales support
Turnaround drawings, logo files, mood boards or photos — any common format.
Every wear occasion

One costume, every place your brand shows up

From a mall opening to a stadium halftime, the same pattern room builds the suit the day demands.

As a custom mascot costume, the brief is almost always the same: a character that has to be recognisable at twenty metres and wearable for an hour. Theme parks order a theme park mascot costume with quick-change liners and a rotating set of performers in mind; retailers order a retail mascot costume that looks correct in a shop window and survives a sidewalk crowd; clubs order a sports mascot costume where vision and hearing matter more than weight.

Event and brand teams come to us as a mascot costume maker for one-off characters — a plush mascot costume built from a launch film, a pack design or a founder's sketch — and agencies use us as their mascot suit manufacturer when a campaign rolls into several markets and each market needs its own suit in its own size. If your character already exists in print, we handle custom mascot character development from your turnaround; if it belongs to someone else, we produce it under licence as an OEM mascot costume partner.